Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Powder Defoamers for Dry-Mix and Powdered Products

Why emulsion defoamers fail in dry powders, how powder-grade defoamers are built, and the dosing rules for detergents, mortar and starch.

By the ElonMek technical team · Application Guide · Published 2026-05-22

Dry mortar powder blending line mixing a powdered product

The problem with emulsions in dry powders

A water emulsion added to a dry powder introduces water, which caks the powder and destroys the flow properties the product was designed to have. Powder-grade defoamers carry the active on an insoluble carrier, so they can be dry-blended with the rest of the formulation.

Silicone powder versus silicone-free powder

Our 118G, 208G and 418G are silicone powder grades; 618G and 2803AG are silicone-free. The silicone versions give faster knockdown and longer inhibition. The silicone-free versions exist for cationic starch processes and other applications where silicone is not permitted, and they avoid the residue question entirely.

Dosing into powders

Typical addition is 0.1–1.0 wt% depending on the foaming system. Add the powder with the other dry components in a mixer and blend for the full cycle. Do not add it to an already-made slurry. You will get local concentration spikes and uneven distribution.

Particle size matters

Coarse granules dissolve more slowly but survive harsher shear. Fines disperse faster and are better for low-temperature or high-shear duty. Our 418G is the alkali-resistant grade for high-pH powder systems.

Keep reading

Related guides

All technical guides

Markets

Buying from Southeast Asia?

The same grade families are supplied to textile, paper and construction plants in Vietnam, Cambodia and Laos.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.