Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Fermentation, Food & Pharma Defoamers

A microbial culture is a delicate thing. Silicone residue, fogging and antifoam carry-over disturb the strain, and spotting shows up in the finished product. Citric acid and antibiotic fermentations foam hard.

Stainless steel fermentation tanks in a pharmaceutical production hall

What the defoamer has to do here

You need non-toxic, food-compatible chemistry that does not spot, picks up little moisture and leaves the culture requirements alone. In practice that means polyether, not silicone.

Recommended

Models Usually Specified for Fermentation, Food & Pharma

Also consider

Other Models in the Same Chemistry

Before you specify

Fermentation, Food & Pharma: questions we get asked

Why polyether rather than silicone for fermentation?
Silicone chemistry can interfere with downstream processing and with how the broth behaves in the fermenter. Polyether does the foam-control job without that risk, which is why it is the default across fermentation, food and pharmaceutical processes.
Will the defoamer affect the culture or the yield?
Non-toxicity and no interference with the strain are the two things we design for, but the only way to be certain in your process is a shake-down test on your own broth. Send us the strain, the medium and the operating window and we will pick the models worth trialling.
Can the defoamer be sterilised with the medium?
Ask us about the specific grade before you plan on it. Heat stability differs between models and sterilisation cycles differ between plants. Give us your sterilisation conditions and we will tell you which models fit.
Markets

Buying from Southeast Asia?

The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.