Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Concrete & Construction Defoamers

Polycarboxylate water reducers entrain air by nature. Too much of it weakens the concrete, leaves voids and shows up later as durability problems, yet the bubbles the air entrainer puts in have to stay.

Fresh concrete being poured from a pump truck at a construction site

What the defoamer has to do here

The job is precise foam control: take out the harmful macro- and micro-foam, leave the useful entrained air where it is, and hold compressive, flexural and slump strength at full value.

Recommended

Models Usually Specified for Concrete & Construction

Also consider

Other Models in the Same Chemistry

Before you specify

Concrete & Construction: questions we get asked

Will the defoamer reduce the air content and the strength of the concrete?
That is exactly what the trial is for. The job is to take out harmful macro- and micro-foam while leaving the useful entrained air that protects the mix against freeze-thaw, and to hold compressive, flexural and slump strength at full value.
Can it be used in dry-mix mortar and grout?
Yes. The powder grades are made for dry-mix systems and disperse when the mortar is mixed with water. 118G / 208G / 418G is the usual starting point.
Which model for polycarboxylate admixtures?
F681 / 2918N is the model we usually specify for polycarboxylate superplasticiser systems. Tell us the admixture solids and where the defoamer sits in the batching sequence and we will confirm.
Markets

Buying from Southeast Asia?

The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.