Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Pulp & Paper Defoamers

Pulp washing, screening, dilution and black liquor handling all throw stable foam that traps fibre, pulp and filler. Carry-over into the sheet shows up as spots, and in the recovery cycle the same foam chokes black liquor filter drainage.

Paper mill winding machine with a giant white paper roll

What the defoamer has to do here

Fast foam break and real degassing, alkali resistance through the brown liquor cycle, and for low-pH sizing systems a silicone-free chemistry that cannot spot the sheet.

Recommended

Models Usually Specified for Pulp & Paper

Silicone & Ether

663-10 / 663-20 / 6557 High-Content Silicone-Polyether Defoamer

663-10663-206557

An emulsion defoamer built from modified polysiloxane and high-carbon polyether. It is at its strongest in pulp making, black liquor washing and landfill leachate.

View specifications
Silicone & Ether

3020 / 3020A Fatty Alcohol-Silicone Emulsion Defoamer

30203020A

A fatty alcohol-silicone emulsion defoamer that resists strong alkali, heat and shear. It stays stable with no gel formation and improves filter drainage on black liquor.

View specifications
Silicone-Free

663 / 65340 Silicone-Free Fatty Alcohol Ether Emulsion Defoamer

66365340

A silicone-free fatty-alcohol-ether emulsion for low-pH foaming systems such as paper white water. It clears surface foam quickly and pulls micro-bubbles off the fibres.

View specifications
Silicone-Free

653 / 653D Silicone-Free Fatty Alcohol Ether Emulsion Defoamer

653653D (degassing)

A silicone-free emulsion defoamer built for paper sizing white water and other low-pH systems. Grade 653D is tuned for degassing duty.

View specifications
Silicone-Free

663-10A Silicone-Free Fatty Alcohol Ether Emulsion Defoamer

663-10A

A fatty-alcohol-ether emulsion for the many processes that rule silicone out. It breaks foam fast, disperses well, stores stably and degasses cleanly.

View specifications
Mineral Oil / PE Ester

PT24 High-Fatty-Acid-Ester Emulsion Defoamer

PT24

A high-fatty-acid-ester emulsion defoamer for systems where ordinary silicone is the wrong choice. It leaves no oil ring and does not block membranes, and it breaks foam fast.

View specifications
Also consider

Other Models in the Same Chemistry

Before you specify

Pulp & Paper: questions we get asked

Is a silicone defoamer safe to use on a paper machine?
Usually not on the wet end. Silicone that carries over with the sheet tends to show up later as spots and coating defects. That is why the models we list for pulp, paper and board are polyether and mineral-oil based, with silicone-free chemistry for low-pH sizing systems.
Which model should I start with for black liquor?
3020 / 3020A is the usual first trial for black liquor and pulp washing. If your problem is filtration drainage in the recovery cycle rather than foam on the washer, tell us the liquor temperature and solids, because the choice changes with both.
Do you have grades for tissue and food-grade board?
Yes. The silicone-free emulsions exist precisely for processes where silicone residue is not acceptable. Every model ships as a non-hazardous good with a safety data sheet.
Markets

Buying from Southeast Asia?

The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.