Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Metalworking & Industrial Cleaning Defoamers

Cutting, grinding and spray-cleaning fluids run hot and under shear. Their surfactant packages build dense foam that lifts metal fines and swarf into the filtration stage.

Machined metal parts in an industrial washing line

What the defoamer has to do here

Sustained inhibition at a low dose keeps the fluid clear and the filter clean, and it has to hold through the whole machining cycle.

Recommended

Models Usually Specified for Metalworking & Industrial Cleaning

Also consider

Other Models in the Same Chemistry

Before you specify

Metalworking & Industrial Cleaning: questions we get asked

Will the defoamer affect lubricity or corrosion protection?
Not at the doses used. Foam control is added at a fraction of a percent and the models we list are built for metalworking fluid systems rather than general use. Your fluid supplier formulation is the reference point, so trial on the fluid you actually run.
We get foam in the sump and the parts still come out dirty. Which is the problem?
Usually the foam is the cause of the poor cleaning, not a separate fault. Foam holds fines and tramp oil against the part instead of letting the fluid carry them to the filter. Break the foam and cleaning normally improves without changing anything else.
How often does the defoamer need to be added?
Most plants dose continuously with the fluid make-up rather than in one shot, because the foam load tracks the machining cycle. Tell us your sump size and make-up rate and we will give you a starting dose.
Markets

Buying from Southeast Asia?

The same grade families are supplied to plants in Vietnam, Cambodia and Laos. The market pages set out the foam problems typical of those industries, country by country.

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.