A Vietnamese industrial park usually shares one effluent plant between food, textile and metalworking tenants. Protein, oil and surfactant arrive together, the aeration basin foams, and the plant overflows or cuts aeration before it is hydraulically overloaded.

Surfactant and protein stabilise the foam on the surface, and the blanket lifts with the air. Overflow follows, and oxygen transfer drops before anyone notices the load.
Leachate carries a high and variable surfactant load, so a dose that worked last month can be short this month. Continuous dosing beats batch correction.
Protein-rich effluent foams in the balancing tank and again in the DAF unit. Where the plant also runs a fermentation or food process, the same chemistry question appears twice in one site.
Photographed at the Tianjin plant: batch labelling, the QC bench that releases a batch, and the packing a liquid grade travels in.



| Model | Chemistry | Typical use | Property data |
|---|---|---|---|
| 118G / 208G | Silicone & Ether | Wastewater treatment, Industrial cooling water | Data |
| 218B / 218PF | Silicone & Ether | Landfill leachate, Microbiological water treatment | Data |
| 3020 / 3020A | Silicone & Ether | Wastewater treatment, Landfill leachate | Data |
| 663-10 / 663-20 | Silicone & Ether | Landfill leachate, Wastewater treatment | Data |
Typical uses are indicative and describe where the grade is normally applied, not a guaranteed fit. Every property table is published on the product page.
Our team has provided technical support to converters and formulators in Vietnam, Cambodia and Laos: reviewing the foam system, naming the grades worth testing and reading the trial results together. Everything runs in English, by email or WhatsApp.
Every grade is made at our own plant in Tianjin, in production since 2009, and each model carries its own property table on this site. A formulator can compare active content, viscosity, pH and ionic type before asking for a sample.
Tell us the system and the problem, and we will say which models to compare and how to run the comparison. Sample quantities are small on purpose: the aim is a decision on one grade, not stock on a shelf.
Send the system: base chemistry, temperature, surfactant load and how the foam behaves. We will reply with the grades worth testing and how to read the result.
Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.