Factory-direct manufacturer · Tianjin, China · 6 defoamer types, 64 categories, 114 models

Defoamer for Vietnamese Paper Mills: Stock Preparation, White Water, Coating

Recycled furnish is the norm in Vietnam, and it brings printing ink, starch and de-inking surfactant into the stock. Foam then collects in the approach flow and the white water loop, and the sheet shows it as pin holes, coat streaks and unstable drainage long before anyone measures the air content.

Paper machine wet end in a pulp and paper mill

Three places foam costs a Vietnamese mill money

Stock preparation and approach flow

De-inking and recycled stock foam in the pulper and again in the machine chest. Foam reaching the headbox shows as pin holes and as a stock that drains unevenly.

Applications

Foam problems we are asked about in Vietnam

Inside the plant

Where the drums for Vietnam are actually filled

Photographed at the Tianjin plant: batch labelling, the QC bench that releases a batch, and the packing a liquid grade travels in.

Compounding hall at the Tianjin defoamer plant
Silicone, silicone-free and mineral-oil lines run side by side, so a mill can be matched to the chemistry it already runs.
Operator charging a reaction vessel with base chemistry
Reaction and dispersion run on our own lines, and the same team answers the questions that come back from a trial.
1000 kg IBC tote of a liquid grade ready to load
Larger volumes can travel in a 1000 kg IBC tote instead of drums.
Starting point

Grades whose published applications cover pulp, paper and coating

ModelChemistryTypical useProperty data
2545 / 1210Silicone & EtherWater-based coatings, Pulp and paperData
30801Silicone & EtherWater-based coatings, Pulp and paperData
AC30 / AC50Silicone & EtherWater-based coatings, Pulp and paperData
12701 / 3010PolyetherPulp and paperData

Typical uses are indicative and describe where the grade is normally applied, not a guaranteed fit. Every property table is published on the product page.

Dosing

How to trial a grade in a Vietnam plant

Support

How we work with Vietnamese buyers

Technical support already delivered in the region

Our team has provided technical support to converters and formulators in Vietnam, Cambodia and Laos: reviewing the foam system, naming the grades worth testing and reading the trial results together. Everything runs in English, by email or WhatsApp.

One plant, published property data

Every grade is made at our own plant in Tianjin, in production since 2009, and each model carries its own property table on this site. A formulator can compare active content, viscosity, pH and ionic type before asking for a sample.

Samples sized for a decision

Tell us the system and the problem, and we will say which models to compare and how to run the comparison. Sample quantities are small on purpose: the aim is a decision on one grade, not stock on a shelf.

FAQ

Vietnam: questions we get asked

Which grade for a recycled-furnish machine?
Recycled stock foam is usually surfactant-driven, so the shortlist starts with the grades whose published applications list pulp, paper or coating. The deciding columns are active content and ionic type against the charge of your wet-end chemistry.
Will a defoamer affect sizing or strength?
That is what the trial checks. Dose in steps on a stock sample and compare sheet properties, not only foam height: an over-dose is the usual cause of a sizing or strength complaint after a defoamer change.
Is food-grade board a different shortlist?
Yes. Where the board contacts food, the documentation question comes before the performance question, and the model has to be confirmed against the destination regulation rather than picked from a family name.
Can ElonMek quote FOB or CIF terms for Vietnam?
FOB and CIF are the two terms normally discussed, and a quote is prepared per inquiry against the grade and packing actually chosen. This page is an introduction to the grades and to the support behind them, not an offer: there is no price list here and no quotation until the system and the packing are known.
Which export documents come with a shipment?
The commercial invoice, packing list and bill of lading travel with every consignment, together with the safety data sheet for the specific grade. The HS code is confirmed for that grade at the time of the order, because classification follows the chemistry of the grade rather than the product family.
What packing can be specified?
Liquid grades are supplied in 200 kg drums or 1000 kg IBC totes; paste and powder grades travel in pails or cartons. The packing that applies to a given grade is printed on its product page, and the shipping marks can carry the consignee details required at destination.

Other Southeast Asian markets

Next step

Send the system: base chemistry, temperature, surfactant load and how the foam behaves. We will reply with the grades worth testing and how to read the result.

Describe your foam system WhatsApp

Send us your foam system

Base chemistry, temperature, shear and current dosage. Our technical team will run a shake-down trial and recommend a model and a dose, normally within 24 hours on working days.