By the ElonMek technical team · Application Guide · Published 2026-04-30

Flash point is a safety requirement, not a preference
In gas-field and offshore work the produced gas is frequently flammable or inerted. Our F-37 and F391 grades have a flash point above 80 °C and are specified for those duties. Do not substitute a general product into a classified area.
Low silicone content protects the product
Silicone contamination in the crude stream can poison downstream catalysts and break water-in-oil separation. Our oilfield grades deliberately keep silicone content low while retaining strong foam control, which is why they deliver a reliable product safety profile as well as foam control.
High-salinity, high-water-cut wells
Wells producing high water cut are the hardest case: the foam is both persistent and thermally aggressive. Grade 681F was co-developed with major domestic oilfields for exactly this environment and self-emulsifies in the produced water, with no oil ring and no suspended solids after high-temperature dilution. Its inhibition improves at higher liquid temperature.
Delayed coking and refining
Vacuum residue delayed coking generates large volumes of stable foam at very high temperature. Here the requirement is rapid knockdown at low dosage with no carry-over into the coke, and the F-37 / F391 and YD291 / 292 / 393 categories are used.
